- Phone 1300 727 728
RAPP Australia Pty Ltd has been in operation for the last 30 years and is the parent company to the NEANN and firelogistics divisions.
RAPID TESTS FOR TRAINED PERSONNEL
We offer you the BfArM (AT321/21) and PEI listed, reimbursable Coretests®-COVID-19 Ag rapid test, the use of which is already well established. In medicine, so-called point-of-care testing (POCT) refers to diagnostic examinations that do not take place in a central laboratory, but on site (in pharmacies, test centers, hospitals, care facilities or doctor’s offices) by trained personnel.
Checklist
What’s special about our
COVID-19 Coretests® for professionals?
- 3-in-1-Application by anterior nasal swab, nasopharyngeal swab and throat swab
- Developed and manufactured according to EU standard 98/79 EC for in vitro diagnostics, CE marked
- QR code with sequential number for unmistakable documentation
- Clinical sensitivity: 98.1 %
- Clinical specificity: 99.6 %
- Detection limit of 22.5 TCID50/ml
- BfArM listed under AT321/21, AT267/20 (Link)
- RAT listed (2019) (Link)
- PEI evaluated (Link)
- For use by medical professionals only
- Free from health-hazardous substances
- Detection of viral mutations including omicron
AT A GLANCE
COVID-19 Coretests® for professionals
3 - 15 minutes
test time
The test result is available within 3 – 15 minutes.
2ºC–30ºC
storage
Easy handling and shelf life due to extended temperature range.
3-in-1-application
Sample type
Smear in the anterior nasal cavity, nasopharyngeal and pharyngeal.
TEST PROCEDURE
CORETESTS®-COVID-19 AG rapid tests for professionals
APPLICATION STEP BY STEP
Step 1
Unscrew the lid of the sample tube
Step 2
Remove the nasal swab from the package
Step 3
Gently insert the swab 2–4 cm into the nostril
Step 4
Roll the swab 5 times along the nasal mucosa, repeat the procedure with the same swab in the other nostril
Step 5
Insert the swab into the tube, turn 10 times and squeeze the base of the tube
Step 6
Squeeze the tube a few times with two fingers
Step 7
Screw the lid on the sample tube and break off the tip of the lid
Step 8
Take the test cassette from the sealed bag and place it on a flat, clean and dry surface
Step 9
Add 2–3 drops of the solution from the sample tube into the recess of the test cassette
Step 10
The result will appear after 3–15 minutes
EVALUATION
Step 1
A control line (C) and no test line (T) appears on the test cassette
Step 2
No control line (C) appears on the test cassette. An appearance of the test line (T) is irrelevant here
Step 3
Both a control line (C) and a test line (T) appear on the test cassette
Contact us
RAPP Australia Pty Ltd – HEAD OFFICE
160-162 McClelland Ave,
P.O. Box 120,
Lara, Victoria, 3212
Australia
Phone: 1300 727 728
E-mail: sales@rappaustralia.com.au
NEANN and 
firelogistics are divisions of 
RAPP Australia Pty Ltd
